5251 aluminum sheet is a medium strength alloy with good ductility and formability. Available with alloy 5251, temper O, H22, H24, H26 and thickness 0.2-50 mm.
5251 aluminum sheet is a medium strength alloy with good ductility and formability. It is widely used in marine and offshore applications due to its excellent corrosion resistance, especially in saltwater environments. It also has good weldability and workability, making it suitable for various fabrication processes. 5251 aluminum sheet is available in different tempers, such as O (annealed), H22 (quarter hard), H24 (half hard), and H26 (three quarter hard).

The chemical composition of 5251 aluminum sheet is shown in the table below. The main alloying elements are magnesium and manganese, which enhance the strength and corrosion resistance of the alloy. The other elements are present in trace amounts.
| Element | % Present |
|---|---|
| Cu | 0.15 |
| Mg | 1.7-2.4 |
| Si | 0.4 |
| Fe | 0.5 |
| Mn | 0.1-0.5 |
| Zn | 0.15 |
| Ti | 0.15 |
| Cr | 0.15 |
| Al | Balance |
The mechanical properties of 5251 aluminum sheet vary depending on the temper and thickness of the material. The table below summarizes the typical values for some common tempers and thicknesses.
| Temper | Thickness (mm) | Proof Stress (MPa) | Tensile Strength (MPa) | Hardness (HB) |
|---|---|---|---|---|
| O | 0.2-50 | 60 min | 160-200 | 44 |
| H22 | 0.2-25 | 120 min | 190-230 | 56 |
| H24 | 0.2-12.5 | 140 min | 210-250 | 62 |
| H26 | 0.2-4 | 170 min | 230-270 | 69 |
The physical properties of 5251 aluminum sheet are listed in the table below.
| Property | Value |
|---|---|
| Density | 2.69 g/cm3 |
| Melting Point | 625°C |
| Modulus of Elasticity | 70 GPa |
| Electrical Resistivity | 0.44 x 10-6 Ω.m |
| Thermal Conductivity | 134 W/m.K |
| Thermal Expansion | 25 x 10-6 /K |
5251 aluminum sheet has a wide range of applications in various industries, such as:
Boats
Marine structures
Aircraft parts
Vehicle panels
Furniture tubing
Silos
Containers

5251 aluminum sheet can be fabricated by various methods, such as:
Cutting
Bending
Forming
Drilling
Punching
Riveting
Welding

5251 aluminum sheet is a readily weldable alloy by both gas and arc welding methods. The recommended filler wire is 5356 when welding to itself, to other 5XXX series alloys, to 6XXX series alloys, or to 7XXX series alloys. The recommended filler wire is 4043 when welding to 5005, 5020, or to any of the 1XXX or 3XXX series alloys.
5251 aluminum sheet has average machinability compared to other aluminum alloys. The machinability depends on the temper of the material, with softer tempers being easier to machine than harder ones. The use of lubricants and sharp tools can improve the machining performance.

5251 aluminum sheet can be finished by various methods, such as:
Anodizing
Painting
Powder coating
Polishing
Brushing
Address
52 Dongming Road, Guancheng District, Zhengzhou City, Henan Province, China. 450000
Call us
Henan Huawei Aluminum Co.,Ltd.
We are a professional aluminum products manufacturer and supplier from China, The main products include: aluminum sheet plate/coil/foil roll/strip, aluminum disc circle, aluminum tread plate, embossed aluminum, mirror aluminum, color coated aluminum etc
Categories
QR Code
Copyright © Henan Huawei Aluminum Co., Ltd. All Rights Reserved.