There are generally two reasons for quality problems in the use of aluminum plates. One is the negligence of the staff during the production process,Aluminum for boat and the other is the improper operation during the later use. As one of the common quality losses,Aluminum for boat the oil pollution problem can be avoided from the operation and equipment use during the production process.
The oil stain does not mean that the aluminum plate is stained after the production is completed,Aluminum for boat but after the aluminum plate is rolled, too much oil is carried on the surface of the aluminum tip,Aluminum for boat and there is also excess oil in addition to the rolling oil film. During inspection and slitting production,Aluminum for boat these visible oils will be found on the surface. A lot of oil is mainly distributed above and below the exit of the rolling mill or at the roll neck.
After being splashed,Aluminum for boat it drips on the surface of the box,Aluminum for boat which leads to abnormal conditions in the roll cleaner of the rolling mill due to the dripping of the thickness measuring head of the rolling mill. The ingredients are not only complicated but also extremely dirty.