5251 Aluminum Sheet Introduction

☆☆☆☆☆
(0 customer reviews)

5251 aluminum sheet is a medium strength alloy with good ductility and formability. Available with alloy 5251, temper O, H22, H24, H26 and thickness 0.2-50 mm.

5251 Aluminum Sheet Introduction

5251 aluminum sheet is a medium strength alloy with good ductility and formability. It is widely used in marine and offshore applications due to its excellent corrosion resistance, especially in saltwater environments. It also has good weldability and workability, making it suitable for various fabrication processes. 5251 aluminum sheet is available in different tempers, such as O (annealed), H22 (quarter hard), H24 (half hard), and H26 (three quarter hard).

5251 aluminum sheet surface

Chemical Composition

The chemical composition of 5251 aluminum sheet is shown in the table below. The main alloying elements are magnesium and manganese, which enhance the strength and corrosion resistance of the alloy. The other elements are present in trace amounts.

Element % Present
Cu 0.15
Mg 1.7-2.4
Si 0.4
Fe 0.5
Mn 0.1-0.5
Zn 0.15
Ti 0.15
Cr 0.15
Al Balance

Mechanical Properties

The mechanical properties of 5251 aluminum sheet vary depending on the temper and thickness of the material. The table below summarizes the typical values for some common tempers and thicknesses.

Temper Thickness (mm) Proof Stress (MPa) Tensile Strength (MPa) Hardness (HB)
O 0.2-50 60 min 160-200 44
H22 0.2-25 120 min 190-230 56
H24 0.2-12.5 140 min 210-250 62
H26 0.2-4 170 min 230-270 69

Physical Properties

The physical properties of 5251 aluminum sheet are listed in the table below.

Property Value
Density 2.69 g/cm3
Melting Point 625°C
Modulus of Elasticity 70 GPa
Electrical Resistivity 0.44 x 10-6 Ω.m
Thermal Conductivity 134 W/m.K
Thermal Expansion 25 x 10-6 /K

Applications

5251 aluminum sheet has a wide range of applications in various industries, such as:

  • Boats

  • Marine structures

  • Aircraft parts

  • Vehicle panels

  • Furniture tubing

  • Silos

  • Containers

5251 Aluminum Sheet 2mm

Fabrication

5251 aluminum sheet can be fabricated by various methods, such as:

  • Cutting

  • Bending

  • Forming

  • Drilling

  • Punching

  • Riveting

  • Welding

5251 aluminum production line

Welding

5251 aluminum sheet is a readily weldable alloy by both gas and arc welding methods. The recommended filler wire is 5356 when welding to itself, to other 5XXX series alloys, to 6XXX series alloys, or to 7XXX series alloys. The recommended filler wire is 4043 when welding to 5005, 5020, or to any of the 1XXX or 3XXX series alloys.

Machining

5251 aluminum sheet has average machinability compared to other aluminum alloys. The machinability depends on the temper of the material, with softer tempers being easier to machine than harder ones. The use of lubricants and sharp tools can improve the machining performance.

aluminum 5251 for sale

Finishing

5251 aluminum sheet can be finished by various methods, such as:

  • Anodizing

  • Painting

  • Powder coating

  • Polishing

  • Brushing

Previous Post
Next Post

Get a Quote!

Edit Template

Address

52 Dongming Road, Guancheng District, Zhengzhou City, Henan Province, China. 450000

Call us

Copyright © Henan Huawei Aluminum Co., Ltd. All Rights Reserved.