5083 aluminum coil is the alloy with the strongest corrosion resistance among practical non-heat treated alloys. Available with alloy 5083, temper O, H111, thickness 0.15-5.0mm and width 100-2650mm.

5083 aluminum coil is the alloy with the strongest corrosion resistance among practical non-heat treated alloys. It belongs to the Al-Mg alloy and is often used in welded structures.
5083 aluminum coil is also used as marine grade aluminum due to its excellent corrosion resistance. In practice, we can find that the surrounding automobiles, subway light rails, airplanes, pressure tank cars, TV towers and other structural parts are all composed of 5083 aluminum coils.
| Si | Cu | Mg | Zn | Mn | Ti | Fe | Cr |
| ≤0.4 | ≤0.1 | 4.0-4.9 | 0.25 | 0.4-1.0 | ≤0.15 | 0.4 | 0.05-0.25 |
| Temper | Thickness mm | Tensile strength (Rb/MPa) | Yield strength (Rp0.2/MPa) | Elongation rate % | Elongation rate % | Bending radius |
| O/H111 | >0.2-0.5 | ≥275-350 | ≥125 | 11 | ____ | 0.5t |
| O/H111 | >0.5-1.5 | ≥275-350 | ≥125 | 12 | ____ | 1.0t |
| O/H111 | >1.5-3.0 | ≥275-350 | ≥125 | 13 | ____ | 1.0t |
| O/H111 | >3.0-6.0 | ≥275-350 | ≥125 | 15 | ____ | 1.5t |
| O/H111 | >6.0-12.5 | ≥275-350 | ≥125 | 16 | ____ | 2.5t |
| O/H111 | >12.5-50 | ____ | ____ | ____ | 15 | ____ |
| O/H111 | >50-80 | ≥270-345 | ≥115 | ____ | 14 | ____ |
| H12 | >0.2-0.5 | ≥315-375 | ≥250 | 3 | ____ | ____ |
| H12 | >0.5-1.5 | ≥315-375 | ≥250 | 4 | ____ | ____ |
| H12 | >1.5-3.0 | ≥315-375 | ≥250 | 5 | ____ | ____ |
| H12 | >3.0-6.0 | ≥315-375 | ≥250 | 6 | ____ | ____ |
| H14 | >0.2-0.5 | ≥340-400 | ≥280 | 2 | ____ | ____ |
| H14 | >0.5-1.5 | ≥340-400 | ≥280 | 3 | ____ | ____ |
| H14 | >1.5-3.0 | ≥340-400 | ≥280 | 3 | ____ | ____ |
| H14 | >3.0-6.0 | ≥340-400 | ≥280 | 3 | ____ | ____ |
| H16 | >0.2-0.5 | ≥360-420 | ≥300 | 1 | ____ | ____ |
| H16 | >0.5-1.5 | ≥360-420 | ≥300 | 2 | ____ | ____ |
| H16 | >1.5-3.0 | ≥360-420 | ≥300 | 2 | ____ | ____ |
| H16 | >3.0-4.0 | ≥360-420 | ≥300 | 2 | ____ | |
| H22/H32 | >0.2-0.5 | ≥305-380 | ≥215 | 5 | ____ | 0.5t |
| H22/H32 | >0.5-1.5 | ≥305-380 | ≥215 | 6 | ____ | 1.5t |
| H22/H32 | >1.5-3.0 | ≥305-380 | ≥215 | 7 | ____ | 2.0t |
| H22/H32 | >3.0-6.0 | ≥305-380 | ≥215 | 8 | ____ | 2.5t |
| H24/H34 | >0.2-0.5 | ≥340-400 | ≥250 | 4 | ____ | 1.0t |
| H24/H34 | >0.5-1.5 | ≥340-400 | ≥250 | 5 | ____ | 2.0t |
| H24/H34 | >1.5-3.0 | ≥340-400 | ≥250 | 6 | ____ | 2.5t |
| H24/H34 | >3.0-6.0 | ≥340-400 | ≥250 | 7 | ____ | 3.5t |
| H26/H36 | >0.2-0.5 | ≥360-420 | ≥280 | 2 | ____ | ____ |
| H26/H36 | >0.5-1.5 | ≥360-420 | ≥280 | 3 | ____ | ____ |
| H26/H36 | >1.5-3.0 | ≥360-420 | ≥280 | 3 | ____ | ____ |
| H26/H36 | >3.0-4.0 | ≥360-420 | ≥280 | 3 | ____ | ____ |
| H112 | >6.0-12.5 | ≥275 | ≥125 | 12 | ____ | ____ |
| H112 | >12.5-40 | ≥275 | ≥125 | ____ | 10 | ____ |
| H112 | >40-50 | ≥270 | ≥115 | ____ | 10 | ____ |
| F | >4.5-150 | ____ | ____ | ____ | ____ | ____ |

1. Weldability
5083 aluminum alloy welding performance is good, can be welded by a variety of welding methods, the strength of the weld can be equal to the annealed state of the matrix strength. At the same time, it has good self-extension, cold forming, and reliable corrosion resistance, with the lowering of the temperature, the base metal and welded joint tensile strength, yield strength, elongation are increased, low temperature toughness is very good.
2. Corrosion resistance
5083 aluminum of various states have good corrosion resistance, the atmosphere, fresh water, seawater, alcohol, diesel, organic acids, concentrated nitric acid, a variety of food have good corrosion resistance. However, 5083 alloy is prone to stress corrosion cracking (scc), in order to avoid stress corrosion cracking, 5083 alloy working temperature to not exceed 65 C is appropriate.
3. Low density, high strength, aluminium plate for marine, lightweight automotive aluminum, aluminum plate for tanker special;
4.5083 thick aluminum alloy plate corrosion resistance, durable, economic and environmental protection;
5.5083 aluminum sheet production process, adding a trace of Be, reduce the ingot cracking tendency, improve the surface quality of the rolled plate;
6. The surface of aluminum sheet plate has no oil spot, no wave, no scratch, no roll mark, neatly cut edge and no burr.

Address
52 Dongming Road, Guancheng District, Zhengzhou City, Henan Province, China. 450000
Call us
Henan Huawei Aluminum Co.,Ltd.
We are a professional aluminum products manufacturer and supplier from China, The main products include: aluminum sheet plate/coil/foil roll/strip, aluminum disc circle, aluminum tread plate, embossed aluminum, mirror aluminum, color coated aluminum etc
Categories
QR Code
Copyright © Henan Huawei Aluminum Co., Ltd. All Rights Reserved.